tabport.blogg.se

Install lattice under deck video
Install lattice under deck video






install lattice under deck video

  • 12 inch square concrete blocks to provide support for the lattice, if necessary.
  • Galvanized hinges, and a galvanized latch, for the door.
  • Hot-dipped galvanized fasteners (usually nails).
  • Preservative-treated lumber to support the lattice, and to make the storage area entry door.
  • Preservative-treated lattice for enclosing the area under the deck.
  • Crushed stone, such as #8 or #57, for the storage area floor.
  • Geotextile fabric for the storage area floor.
  • No vents or exhaust duct terminations are under the deck, such as a vent serving a high-efficiency furnace or a clothes dryer exhaust duct a bathroom exhaust duct termination is okay.
  • No equipment is under the deck, such as an air conditioning condenser, a gas meter or an electricity meter, an electrical panel, or the septic tank.
  • The ground around deck post footings will not be disturbed by the project.
  • The ground under the deck is reasonably level and can be sloped at least ¼ inch per foot to drain water.
  • The height under the deck is five feet or more.
  • If these machines can be protected with tarp covers, your new storage area could also house a lawnmower or garden tractor.

    install lattice under deck video

    If the headspace beneath your deck is limited, and if you need to store stuff like gardening tools and supplies or materials that can be protected in bags or containers, this storage project will work well for you. This is a low-cost project, but it’s DIY friendly and suitable for storing items under a deck that can stand exposure to moisture. Option #1: Deck Storage for Items That Can Withstand Moisture Exposure Now that you’ve checked out your deck’s condition and determined what you want to store in the under-deck area, it’s time to decide on options that will suit your needs. Does your neighborhood have restrictive covenants that might impact your project?.What conditions do those items need to preserve them in good condition? For example, do they need to be in a dry area, or can they withstand limited exposure to water?.What do you want to store under your deck?.Your next task is defining your objectives for the storage area under your deck and identifying issues that might limit what you can do. An assessment of the condition of your deck can be useful, even if you decide not to proceed with your deck storage project.

    #Install lattice under deck video professional#

    If you’re unsure about the state of your deck, call in a qualified building inspector to give you an expert assessment.Ī professional may be willing to provide some informal feedback about your storage space project, and about what you might do to improve the condition of your deck. It does not make sense to invest time and money on the area under a deck that is unsafe, or in poor condition. Here, we will briefly discuss what you should consider before attempting to convert the area under your deck into a storage area, as well as some ideas about how you might undertake this project. If the ground under your deck is relatively level and at least five feet between the ground and the deck floor joists, then converting the area under the deck into storage space is a project worth considering. Wouldn’t it be nice to make that space useful? Well, what about making the space into a storage area for your stuff? Some people keep the area covered with mulch, so it isn’t a muddy mess, then they forget about it. Use the Copy/Paste edit tool to create as many copies of the lattice object as needed, then create a Camera view to see the results.What do you do with the area under your deck? Nothing will grow there, except for a few weeds.Make any other desired changes, then click OK.On the Materials panel, set the material that you would like to use for the lattice.Set the Elevation Reference to Absolute and then set an appropriate Elevation at Top/Bottom value.It's recommended to check the Retain Aspect Ratio box prior to changing one of these values if you'd like to maintain the original ratio between the Width and Height.

    install lattice under deck video

    On the General panel, set the Width and Height to your desired values, but keep in mind that this will also adjust the overall size of each strip that is part of the original object.In the Millwork Specification dialog that displays:.After it has been placed, use the Select Objects tool to select the lattice, then click the Open Object edit tool.With the object selected, click to place it in your plan at the desired location.If the Library Browser side window isn't displayed on your screen, navigate to View> Library Browser from the menu to turn its display on.








    Install lattice under deck video